Immersion suits

aquata ARO V20

Outer material made of hardly flammable, tear-proof nylon in orange, inner neoprene layer in yellow
(even after water contact the orange structure of the nylon is preserved), 3 times glued and watertightly sewn on
the outside with a tear-proof thread, excellent insulation even when water penetration occurs due to a damage of the suit.

Hood and gloves attached to the suit, face-flap for additional insulation, Reflecting tape on arms, legs, breast and head, signalling whistle, attachment possibility for a strobe light, pocket with buddy line and stainless carbine snap, each suit individually pressure tested.

5.0 mm neoprene, excellent performance in medium water temperatures, fulfils all SOLAS requirements, foam filled pillow provides buoyancy, heavy-duty harness for helicopter lift-up, large breastpocket.

The neoprene itself is self-extingushing. Suit can be used without lifejacket.

Link to product sheet: ARO v20

ARO v40

Outer material made of hardly flammable, tear-proof nylon in orange, inner neoprene layer in yellow (even after water contact the orange structure of the nylon is preserved),
3 times glued and watertightly sewn on the outside with a tear-proof thread, excellent insulation even when water penetration occurs due to a damage of the suit. 

Hood and gloves attached to the suit, face-flap for additional insulation, Reflecting tape on arms, legs, breast and head, signalling whistle, attachment possibility for a strobe light,
pocket with buddy line and stainless carbine snap, each suit individually pressure tested.

 

aquata ARO V20 OP

Outer material made of hardly flammable, tear-proof nylon in orange, inner neoprene layer in yellow (even after water contact the orange structure of the nylon is preserved),
3 times glued and watertightly sewn on the outside with a tear-proof thread, excellent insulation even when water penetration occurs due to a damage of the suit. 

Hood and gloves attached to the suit, face-flap for additional insulation, Reflecting tape on arms, legs, breast and head, signalling whistle, attachment possibility for a strobe light, pocket with buddy line and stainless carbine snap, each suit individually pressure tested. 

5.0 mm neoprene, only to be worn with an approved additional lifejacket including a strobe light 

The neoprene itself is self-extingushing. 

Link to produktsheet: ARO v20 OP

aquata ARO GT100

Variable overall which can be used for rescue operations at sea as well as for disaster control. It does not replace the 6-hours immersion suit according to SOLAS (for this purpose see ARO V20 and ARO V40)

3-layer tear-proof nylon with a breathable membrane (5.0 litres per m² per 24 hours).

Watertight main zipper from left hip around the neck to the left shoulder (can be opened and closed single-handedly), attached hood made out of 2.0 mm neoprene (usage of the hood does not affect the watertightness of the suit), increased wearing comfort through elastic suspenders.

All seals made of heavy-duty latex (for operation beyond SOLAS other seal types may optionally be attached), arm seals are compatible with optional dry-glove ring-systems, 5-finger semidry gloves made of 3.0 mm neoprene (to be stored in the arm pockets).

High safety boots with steel caps (EN protection class 5) attached to the suit, heavy-duty pads on knees, elbows and bottom, knee pockets for adding further protective cushions, large pocket attached to the outside of the suit.

Link to product sheet:  GT 100

 

Instructions to wear the suit

Instructions to wear the suit